The quote for the new machine is on your desk, and your accountant keeps saying "before December 31." Is the deadline real, and does financing the purchase break the tax break?
The Section 179 deduction for equipment financing works like this: a business can deduct the cost of qualifying equipment in the year it is placed in service, and the cost counts even when debt pays for it. The IRS limit for 2026 is $2,560,000. The catch is timing: the equipment has to be ready and available for use by the end of your tax year, not just ordered.
The IRS is specific about the stakes. Publication 946 says "The cost includes the amount you pay in cash, debt obligations, other property, or services." A loan does not shrink the deduction. If you want help lining up financing before year end, see what your business qualifies for on Loanistry.
In this guide
- What the Section 179 deduction is and the 2026 limits
- What "placed in service by December 31" actually means
- How financing interacts with the deduction
- The math on one example business, with the tax bill before and after
- The income limit that catches profitable-looking shops
- Section 179 vs bonus depreciation vs regular depreciation
- Mistakes that cost the deduction, a 6-step plan, and an FAQ
What is the Section 179 deduction and what are the 2026 limits?
Section 179 lets a business deduct the cost of qualifying property in the first year instead of depreciating it over several years. It comes from 26 U.S.C. 179, which covers property "acquired by purchase for use in the active conduct of a trade or business." Publication 946 lists tangible personal property, off-the-shelf computer software, qualified section 179 real property and qualified improvement property as eligible.
The limits for 2026, as IRS Publication 946 lists them, checked November 18, 2026:
| 2026 Section 179 item | Amount (Publication 946) |
|---|---|
| Maximum deduction | $2,560,000 |
| Phase-out threshold (deduction shrinks once property placed in service passes this) | $4,090,000 |
| Sport utility vehicle limit | $32,000 |
| Business use required | More than 50% |
The statute reduces the cap, but not below zero, by the amount the cost of section 179 property placed in service in the year exceeds the phase-out threshold. For most small businesses, neither big number matters. The two limits that do matter are the placed-in-service date and the taxable income limit, both covered below.
Does equipment have to be placed in service by December 31?
Yes for a calendar-year business: the deduction belongs to the year you place the property in service, and Publication 946 defines the placed-in-service date as the date the property is "ready and available for a specific use." Signing the purchase order, paying a deposit or being approved for a loan does not count. Delivery and setup do.
Publication 946 says "The placed in service date for your property is the date the property is ready and available for a specific use." For a machine that needs a crane, a concrete pad and a power hookup, that can be the real bottleneck in December.
Your tax year may not be the calendar year. If your business has a different fiscal year, the cutoff is the last day of that year. Ask your CPA which date applies to you.
Pro tip: Ask the vendor in writing for the delivery and installation date, and keep the delivery receipt and the first-use record. If the IRS asks when the equipment was ready, you want a document, not a memory.
Can you take Section 179 on financed equipment?
Yes: Publication 946 treats debt as part of cost, so financing the machine does not remove it from the deduction. The sentence is "The cost includes the amount you pay in cash, debt obligations, other property, or services." What you deduct is the cost of the equipment, not the cash you have paid so far.
That has two consequences owners often miss:
- The deduction and the payments are separate. You can deduct the full cost in year one and still be paying the loan for years. The deduction cuts your tax bill; it does not pay the lender.
- Interest is a separate cost. The deduction covers the equipment's price. What you pay the lender on top of that is your financing cost, and the quote you get will state it. Use the rate in your own written offer, since it depends on your credit and the lender.
Leases are different. Publication 946 says "You can depreciate leased property only if you retain the incidents of ownership in the property." Whether a lease lets you claim the deduction depends on how the contract is written and treated for tax, so settle it with your CPA before you sign. Our equipment financing vs leasing guide covers the lease types.
What does it save? A machine shop buying a $60,000 machine
The deduction does not make equipment free; it moves a large part of the tax benefit into the year you buy. Take a machine shop that needs a $60,000 machine to take on more work. The $60,000 is the example's own price, not a quote from any dealer.
Under regular depreciation, a 7-year asset using the half-year convention gets a first-year rate of 14.29% in Publication 946 (ask your CPA which class your machine falls in; Publication 946's own example calls office furniture 7-year property). Under Section 179, the shop can deduct the whole cost if it has the income to use it.
| First-year deduction on the $60,000 machine | Amount |
|---|---|
| Section 179 (full cost, if income allows) | $60,000 |
| Regular depreciation, first-year rate 14.29% | $8,574 |
| Extra deduction pulled into year one | $51,426 |
Method: $60,000 x 0.1429 = $8,574; $60,000 - $8,574 = $51,426.
What that is worth depends on the tax rate. The 21% corporate rate is in 26 U.S.C. 11. The IRS 2026 inflation adjustment release lists individual rates of 10%, 12%, 22%, 24%, 32%, 35% and 37%.
| Tax rate | Tax cut by full $60,000 deduction | Tax cut by regular year-one depreciation ($8,574) | Extra cut in year one |
|---|---|---|---|
| 21% (corporate rate) | $12,600 | $1,801 | $10,799 |
| 22% (individual bracket) | $13,200 | $1,886 | $11,314 |
| 24% (individual bracket) | $14,400 | $2,058 | $12,342 |
| 32% (individual bracket) | $19,200 | $2,744 | $16,456 |
Method: deduction x rate. Figures ignore state tax and self-employment tax, and individual owners should check which bracket their taxable income reaches. These are the rates only; your own return decides your result.
In the long run you deduct the same $60,000 either way; Section 179 moves the deduction earlier. The "extra cut in year one" is a timing benefit, not free money. Whether it beats your financing cost depends on the interest in your written quote: add up the interest over the loan's life and compare it to the tax you defer. If the interest is larger than the benefit of getting the tax cut early, buying in December only for the deduction is a bad trade.
What is the taxable income limit on Section 179?
The deduction cannot exceed the taxable income you earn from running your business. The statute says it "shall not exceed the aggregate amount of taxable income of the taxpayer for such taxable year which is derived from the active conduct by the taxpayer of any trade or business." Publication 946 adds that "Any cost not deductible in 1 year under section 179 because of this limit can be carried to the next year."
Suppose the machine shop expects two different years. These income figures are the example's own.
| Example shop's business income before the deduction | Section 179 usable on $60,000 machine | Carried to next year |
|---|---|---|
| $150,000 | $60,000 | $0 |
| $40,000 | $40,000 | $20,000 |
| $0 or a loss | $0 | $60,000 |
Method: the deduction is capped at business taxable income; the rest carries forward under the Publication 946 rule above.
A thin-profit shop gets less from the December rush than a profitable one. In the weak-year row you would still own a machine and a loan, but the deduction would sit in the carryforward.
Pro tip: Ask your CPA for a year-to-date profit estimate before you buy. If income will be low, a purchase in January might use the deduction in a stronger year.
Section 179 vs bonus depreciation vs regular depreciation
Section 179 is an election with a dollar cap and an income cap; bonus depreciation, the "special depreciation allowance," is a separate deduction taken after it. Publication 946 describes the special allowance as "an additional deduction you can take after any section 179 deduction and before you figure regular depreciation under MACRS."
For property acquired and placed in service after January 19, 2025, Publication 946 states the allowance is 100%, citing P.L. 119-21, and says you can instead elect a 40% allowance for the first tax year ending after January 19, 2025. Which rules apply to your purchase turns on acquisition date, so confirm both dates in your paperwork.
| Section 179 | Special depreciation allowance (bonus) | Regular MACRS | |
|---|---|---|---|
| What it does | Deducts cost in year one | Additional first-year deduction after Section 179 | Spreads cost over the recovery period |
| 2026 limit | $2,560,000, phase-out from $4,090,000 | Percentage of basis, 100% for property acquired and placed in service after Jan 19, 2025 | No dollar cap |
| Income limit | Yes, business taxable income | Not part of the Section 179 income limit; ask your CPA how it applies | No |
| Where you elect | Form 4562, Part I | Form 4562 | Form 4562 |
Method: figures and wording taken from Publication 946 and the Form 4562 instructions, checked November 18, 2026. Your CPA decides which combination fits your return.
The order matters: Section 179 first, then bonus, then regular depreciation on what is left. Publication 946 says you "must reduce the depreciable basis of the property by the special depreciation allowance" before computing regular depreciation.
What is the mid-quarter convention, and does a December purchase trigger it?
It can: regular depreciation switches to the mid-quarter convention when more than 40% of the year's depreciable basis is placed in service in the last three months. Publication 946 words the test as comparing "the total depreciable bases of MACRS property you placed in service during the last 3 months of the tax year" with the total for the year, and the threshold is 40%.
For the machine shop, a $60,000 machine in December could be the only thing it buys that year, which would mean all of the basis falls in the last quarter. That would trigger the test. The mid-quarter convention lowers the regular depreciation percentage for the first year, which makes the Section 179 election more valuable for a December purchase. Publication 946 sets the first-year percentage by quarter placed in service, so ask your CPA for the figure that applies to your machine.
What equipment does not qualify, or comes with extra rules?
Property must be used more than 50% for business, and vehicles have their own limits. Publication 946 says "you can elect the section 179 deduction only if you use the property more than 50% for business." Keep a usage record so you can show the business share.
Vehicles are the usual surprise. The 2026 sport utility vehicle limit is $32,000, lower than the headline cap. The Form 4562 instructions list "Passenger automobiles weighing 6,000 pounds or less" and "Any other property used for transportation if the nature of the property lends itself to personal use," such as pickup trucks and SUVs, as listed property with extra recordkeeping. A work truck is not automatically a six-figure deduction. Read the vehicle section of Publication 946 with your CPA before you buy one.
Pro tip: If the purchase is a vehicle, ask your CPA about the weight and use rules before you sign the buyer's order, not after.
Is it smart to finance equipment just for the deduction?
No. The deduction is a timing benefit and the interest is a real cost, so the equipment has to earn more than the loan costs. Run the test with your own numbers:
- Add the total interest and fees from your written lender quote.
- Add the extra first-year tax savings from the table above, using your rate.
- Estimate the monthly revenue or savings the machine adds.
- Check that the payment fits inside that added revenue with room to spare.
The shop's $60,000 machine only makes sense if it brings in more contribution margin each month than the payment takes out. Our advice to most owners: treat the deduction as a discount on an investment that already pays. Our DSCR guide shows how lenders test whether cash flow covers the payment, and the working capital loans page covers shorter-term cash needs.
A lender looks at the same cash flow. Having business loan documents ready also speeds a December approval. If gathering them is a project in itself, compare offers on Loanistry and see what the market says. Lenders decide approvals, rates and timing, and none of them can promise a closing before December 31.
How to claim Section 179 on financed equipment in 6 steps
The order matters: prove the machine pays before you think about the deduction. Here is the sequence for the machine shop.
1. Confirm the machine earns its payment
Estimate the added monthly revenue and compare it to the payment. If it does not clear, stop here.
2. Ask your CPA for a profit estimate and the mix
Get year-to-date taxable income, whether a Section 179 and bonus mix fits, and whether mid-quarter applies.
3. Get written financing quotes
Collect at least two written offers with the rate, term, fees and any prepayment terms. Use the numbers in the quote, not an advertised "starting at" rate.
4. Lock the delivery and installation date
Ask the vendor for a written delivery date that leaves room for slips. The machine must be ready and available for use in the tax year.
5. Keep proof of the in-service date and business use
Keep the invoice, the loan agreement, the delivery receipt and a first-use note. Start a usage log if the equipment could be used personally.
6. Elect on the return
Publication 946 says you elect by "completing Part I of Form 4562." The statute says the election is made on the return for the taxable year. Your preparer files it.
Your next step
Today, call your CPA with one question: "If I place a $60,000 machine in service this year, what does my taxable income look like with and without the deduction?" Then request two written financing quotes. If you want a head start on the second part, start your application on Loanistry.
Sources
All checked November 18, 2026.
- IRS Publication 946, How to Depreciate Property
- IRS Instructions for Form 4562
- 26 U.S.C. 179, Election to expense certain depreciable business assets
- 26 U.S.C. 11, Tax imposed (corporate rate)
- IRS, 2026 tax inflation adjustments
- Loanistry methodology, editorial standards and advertiser disclosure
This guide is general information, not tax advice. Your CPA decides what applies to your return.
For a count of the business days left in December and how lender cutoffs affect the timing, see Should You Apply for a Business Loan in December?



